Types of Paint You Can Use On a Garage Floor

Selecting paint for the garage floor depends on how you use the garage. Garage floors are put up with a lot of abuse. But if it is used for simple things like storing your car, a few tools, and some decorations, you will need a different type of paint than if you use the garage as a machine shop. Below are a few options to help you decide what will work best on your garage floor.

Epoxy Paint

Using epoxy paint as your garage floor paint will help you to prevent stains and deterioration, and it will give your garage floor a tough finish for a good look. Epoxy paint is the gold standard for painting a garage floor because the material can take a licking and keep on kicking. The epoxy paint is resistant to wind, rain, heat, and cold, so this quality makes it difficult to chip and crack the surface. Although applying epoxy paint is a bit more time-consuming than others because you have to be very thorough.

Masonry Paint

Masonry paint is one of the old paints available with which you can paint your garage floor. Masonry paint is known for its durable nature; however, it needs to be refreshed from time to time, and the floor has to be washed with acid. So, while masonry paint can be used on a garage floor, it’s not the most convenient option.

Latex Paint

The type of latex paint you can use on your garage floor is not much different than the once you put on your walls. So, when you buy it, make sure to get the type of latex paint that can be used for the garage floor. One of the advantages of going for this option is that it comes in different colors, giving you the chance to be creative with your garage floor. If you know that your garage will be put under intense pressure by the large objects, they will be forced to hold up. This option may not be the best for you.

Concrete Stain

Concrete stain is the most basic of things you can do to your garage floor. If you are interested in just making sure that your garage floor does not get cracks, then this may be the best choice for you. Concrete stain does not come in different colors like latex paint. However, its application process is simple.

Image source: Bobvila


Strеаkѕ, drips, аnd rоllеr linеѕ; nоthing iѕ mоrе fruѕtrаting thаn seeing thеm ѕhоw uр оn your frеѕhlу painted wаllѕ! Thеу are thе tеlltаlе ѕignѕ of a paint rоllеr uѕеd imрrореrlу. Hаvе уоu еvеr wondered how professional раintеrѕ асhiеvе thаt bеаutiful, ѕmооth finish? Keep reading fоr dirесtiоnѕ.

Lооk fоr a shed-resistant rоllеr соvеr with a рlаѕtiс соrе, nоt саrdbоаrd thаt will аbѕоrb paint аnd brеаk down after a use оr two.

Image source: familyhandyman

Image source: familyhandyman

Fоr rоlling on раint уоu’ll nееd:

  • 5-gallon buсkеt аnd buсkеt ѕсrееn or a painting tray
  • Pаint Rоllеr Frame
  • Rоllеr Cоvеr
  • Extender Hаndlе

Fоllоw thiѕ simple rules to paint likе a pro:

Stаrt with thе tор hаlf оf thе wall, so thаt driрѕ fаll оn unpainted areas. Diр thе rоllеr about hаlfwау into thе paint. Run thе roller аlоng thе grid until thе ѕlееvе is nicely ѕаturаtеd but not driррing.


Wоrk in small zоnеѕ—twо tо thrее ѕԛuаrе fееt at a timе—аnd liѕtеn to the rоllеr. It ѕhоuld ѕоund wеt. When the roller loses thаt crinkly, moist sound, it’ѕ timе tо load it uр with mоrе paint.


Pаint a stripe up thе wаll, bоttоm tо tор. At the tор, turn the roller ѕidеwауѕ, then zigzаg it back dоwn. Rереаt these steps across thе length оf the wаll, with еасh new ѕtriре оvеrlаррing a thrее-inсh роrtiоn of the аrеа аlrеаdу painted. Fоr аll tуреѕ оf rооmѕ, mоѕt еxреrtѕ rесоmmеnd two coats, nо mаttеr what thе paint lаbеl says. Dаrk ѕhаdеѕ, ѕuсh аѕ navy, mау nееd thrее fоr full соvеrаgе.

Avoid аррlуing pressure tо thе roller when раinting. Pressing the rоllеr firmlу аgаinѕt the wаll will lead tо ridgеѕ аlоng thе edges of уоur rоllеr linеѕ. If you find yourself pressing harder to gеt раint on the wаll, it iѕ timе tо rеlоаd your roller.

Hореfullу, these tiрѕ hеlр уоu achieve a flаwlеѕѕ finiѕh thе next timе уоu раint a room in your hоmе, you can as well hire an expert here www.ofallonpainter.com in case you can not do all yourself.

5 Types of Popular Windows

There are different types of windows that can be found in a building or house such as awning windows, casement windows, sash windows, jalousie windows, Victorian windows, french windows, gliding windows, double hung windows, hopper windows, and so on. Today, we will talk about five popular types of windows that are famous worldwide and i know these will be valuable to you if you are intending to install new windows or replace old ones.


Awning windows are famous and can be found in most of the high walls. They give a greater flow of air as well as the light when properly installed and positioned legitimately. They are very useful and valuable for bedrooms where you need privacy, yet proper light and ventilation.

So if you want everything, you can choose awning windows as they are very popular when it comes to window replacement.


These windows were famous before the advancement of air conditioners. However, people still use them due to unique appearance. They are made with a couple of movable slats (made up of glass); just like blinds you see in offices and different structure. They can be installed in bathrooms and other small areas. For privacy, you can opt for tinted or frosted glass slats. Keep in mind that this type of window cannot be sealed completely.


They come with unique styles and designs. Their bottom part cannot be moved, but the upper hung can be opened. These are best for kids’ rooms as they allow complete safety of kids and proper ventilation.

Double hung windows are extremely popular not only in the states, but also around the world. Their maintenance is minimal and they are very easy to clean.


Victorian or Victorian era windows are the most tempting as well as the interesting windows in our architecture. Most of the famous interior designers use play with Victorian windows to create different interior effects. They suit best with Victorian home styles and curtains. If your home is packed with modern contemporary interior, you can add this type of window to create a fusion of advanced and ancient interior.

These are best suitable for living areas.


I am sure that you are familiar with the term “casement” because these are also very popular. They function like a book and come up with many different styles and designs. If you are considering this type of windows, you have many options to choose from; you can even customize it. There is a myth that this type of windows are not beneficial due to their old locking mechanism. However, the new type of replacement windows is completely different and advanced from the older ones.

Types of Roof Drainage Systems

Roof drains are designed such that they carry water away from the roof to protect it. Using the wrong size of pipe for a roof drain will not yield the expected result. It can even create more problems than it solves.

Roof drains come in various shapes and sizes, and will vary on the roof and the building in which they are installed. When roof drains are designed and installed properly, they will still be needing regular maintenance to do the job well.

Before deciding on which drain your home designer will work with, consider the size of the roof, slope, and the location of drainage, inflow rate, safety requirements and the amount of rainfall.

How to Size Your Roof Water Volume.

Roof drains should be evenly spaced and located in low points of the roof or in an area where water usually accumulates.

To determine the size of your roof drain, the surface area of your roof where the drains will be covering must first be calculated and the rate of the average rainfall per hour where the project is located.

Next, determine the roof area each leader drained. This information could be obtained from the manufacturer of the pipe or drain. Divide the roof area by each leader to determine the required number of drains. Choose a leader (drainpipe) size big enough to take care of the volume of water to be drained over-the bigger the pipe, the fewer the roof drains required.

Siphonic Roof Water Drain

This type of roof drain is designed to operate at full capacity when the water is sucked from the roof into the drain at higher speeds compared to flat drains. These roof drains gives the designer room to specify a minimum number of roof drains and connect them to a single rain leader. The siphon roof drains uses the siphoning mechanism to drain water faster than any other type of roof drain. It usually costs more than a regular roof drain, but it works smoothly and doesn’t require much maintenance. This type of drain can be connected by means of horizontal rain leaders instead of having downward or sloped pipes.

Green Roof Water Drains

The new trend in roof drains is to replace the traditional roof with a green roof. Green roofs reduce transmission of noise, improves air quality and reduce heat inside the building. A green roof drainage system is made to accommodate the drainage while protecting the building structure with heavy waterproofing membranes. There are two types of green roofs: intensive and extensive.


patios in St. Louis

Credit: Concrete patios in St. Louis

If you want to lay your patio using a type of concrete patio slab, it is a good idea to start the process by determining thee thickness of slab that will be needed for your patio. Sometimes, this can be a calculation and other times, it might be learning the type of thickness that your patio slab will need to be. Nevertheless, knowing the thickness of your patio slab is important to getting a good lay because they can affect the size of the corner brackets, as well as how much concrete  will be needed in order to ensure that the slabs stay in position for several years.

Work Out the Ratio

You will need to work out the ratio of concrete thicknesses before you can do anything else. The thickness of the slab must slightly be smaller than the area of the hole dugged into the earth to accommodate your slab. Also, you must fill the depth of the hole with gravel, a depth of about 4 inches is the industry norm. It is acceptable to have a patio slab of 50 percent concrete and 50 percent gravel base. This half-and-half ratio makes it easier to work out the correct ratio of the concrete.

Fitting Concrete into the Ground

A concrete slab should be laid completely into the ground, so that it is level with your topsoil. The benefit of laying your slab in the ground is that a greater thickness can be added to your concrete slab, as this will be supported by the gravel base and the surrounding turf. It is advisable to add an extra one or two inches of concrete to your slab so as to make it better able to support the weight of people standing or sitting on it.

Fitting Concrete Above the Ground

If you want to fit your slab above the level of your topsoil, then you have to consider a slightly thinner amount of concrete to be used upon it. This concrete can be about 4 inches high, supported by a gravel base of four inches. If your concrete slab is thinner than average, the ratio of water to cement needs to be adjusted in order to get a proper denseness to your slab.

Considering Joints

If your set of concrete slabs are larger than average, consider installing concrete joints as they will support the concrete patio slab. They must be a quarter of the depth of your slab, so that a 4-inch patio slab will have a 1-inch concrete joint. The appropriate size of the joints must be taken into consideration when working out the proper thickness of the slab.


So guys, i had a great day talking with a painting contractor and as  an expert Saint Louis painting contractor. Am sure he’s nuggets are premium and i want to share with you;

Roll the full height of the wall and keep a wet edge so as to avoid lap marks.

Lap marks are unattractive stripes usually caused by uneven layers of paint buildup. This usually occur when new paint is rolled over an already painted area that is partly dry. To avoid lap marks, maintain a wet edge, so that each new stroke of your roller partly cover the previous stroke before the paint begins to dry.

In order to maintain a wet edge, start painting near a corner, run the roller up and down the whole height of the wall, moving over slightly with each stroke. Wherever necessary, move backward to even out thick spots. Make sure not to let the roller become nearly dry, reload it often so that it is always half loaded, at least. Also, ensure that the open side of the roller frame is facing the area that is already painted so as to put less pressure on the open side of the roller which makes it less likely for you to leave paint ridges.

Mix various cans of paint in a large bucket to ensure a consistent color throughout the room.

The color of paints may slightly vary from one can to the other. The difference may be noticeable if you have to open a new can of paint in the middle of a wall. If the paints are mixed together, it eliminates this kind of problem. The best thing to do is estimate the amount of paint you will need and then mix it in a large bucket. When estimating, add more rather than less to be on a safer side. The left over can always be poured back into the cans. If the job is large, use the bucket and a roller screen instead of a roller tray. It is much faster to load roller with the screen than using a roller pan.

Allow the paint to dry and then cut the tape loose for a perfect edge.

When the paint is dry, it is not advisable to just pull the tape off the trim. Usually, paint forms a film between the wall and the tape. Removing the tape tears pieces of dried paint away from the wall. Therefore, cut the tape loose before pulling off the tape. When the paint is completely dry, a sharp utility knife should be used to slice through the film. A mess will be made if you cut the while it is still gummy.